RSSAll Entries Tagged With: "Gauge"

B & C Eagle SDM-2 2-Inch by 16 Gauge by 7/16-Inch Medium Crown Galvanized Sheathing Staple

  • 7/16″ Senco Style Crown
  • 10,000 per pack

Product Description
B & C Eagle, 2′ Length, 7/16′ Medium Crown, 10,000 Per Box, Galvanized Sheathing Staples, Fit The Following Staple Guns: Senco MI, MII, SNS45, SNS40, SNS50, SNS41, Hitachi N5008AB, N5008AC, Duo-Fast MS7664, Porter Cable Ms200, CMS200, Dewalt D51430…. More >>

B & C Eagle SDM-2 2-Inch by 16 Gauge by 7/16-Inch Medium Crown Galvanized Sheathing Staple

BOSCH POWER TOOLS 3608635000 UPPER REPLACEMENT BLADE – 10 GAUGE

  • Type: Blade
  • Used for #1507, 150
  • 10 Gauge Shear Upper Replacement Blade.

Product Description
“BOSCH” UPPER BLADE

Bosch Power Tools and Accessories is one of the divisions within the Robert Bosch Tool Corporation, which is one of the largest power tool and accessory manufacturers in the world. Bosch provides a complete line of corded and cordless power tools and accessories engineered to survive any jobsite and allow professionals to take control of their work.

Highlights:

Type: Blade
Used for #1507, 150
10 Gauge Shear Upper Replacement Blade…. More >>

BOSCH POWER TOOLS 3608635000 UPPER REPLACEMENT BLADE – 10 GAUGE

What kind of saw to cut 16 gauge 1" square steel tube?

I’m doing a project that requires cutting 1″ 16 gauge square steel tube. I need to make about 50 cuts, many of them at an angle. I am going to be welding these pieces together after cutting. I was originally looking at circular saws but then came across mitre saws and realized that I could measure out the angle cuts much easier. Anyway, i don’t specifically need a mitre saw or a circular saw, I was wondering if anyone had any suggestions on how to cut this pipe accurately. I can probably spend around $130. Maybe there are cheap non-mechanized saws that can cut this steel with a proper blade? maybe there are cheap jig saws that can do the job? maybe there are cheap sawzalls? I need these cuts to be relatively clean and so my tool wont break on me or kill me or bankrupt me? help anyone?

Here are some I was looking at but i’m not sure if they can do the job:

http://www.amazon.com/Hitachi-C10FCE2-10-Inch-Compound-Miter/dp/B000V5Z6RG/ref=sr_1_1?ie=UTF8&s=hi&qid=1276808976&sr=1-1

http://www.amazon.com/Black-Decker-PHS550B-Powered-Handsaw/dp/B000CA6FDY/ref=sr_1_6?ie=UTF8&s=hi&qid=1276808976&sr=1-6

http://www.amazon.com/Milwaukee-6390-21-4-Inch-Tilt-Lok-Circular/dp/B0000222UX/ref=sr_1_2?ie=UTF8&s=hi&qid=1276808976&sr=1-2

Wireless Gauge Interface offers plug and play operation.

Wireless Gauge Interface offers plug and play operation.
Without requiring any tools, i-Wave allows plug-and-play changeover of mechanical gauge heads. StarLock locking device allows connection of new/existing gauges to wireless gauging. Able to work in severe shop floor conditions, wireless handle accommodates any mechanical gauge head featuring standard M10, M6, or M3,5 thread. Unit is protected against coolants and dust, and alkaline C batteries …

Read more on ThomasNet

Where can I buy a small air compressor with pressure gauge and relief gauge but with out the tank.?

Where can I buy a small air compressor with pressure gage and relief Gage but with out the tank. Like for example here
http://www.professional-power-tool-guide.com/wp-content/uploads/2008/08/porter-cable-air-compressor.jpg
but with out the tank. Thank you.

Anyone recommend a good 23 gauge pin nailer over another?

I use 23 gauge pin nailer’s on ocassion for nailing the intricate wood things like inkerbol and small pieces of material. But my 23g. Senco nailer only last me a year, and i don’t even use it that often maybe twice a month.

I’ve seen others out there that are cheaper, Porter cable, Air Locker, Senco etc etc. Which have you had the most luck with and what did it cost?

Bosch 18 Gauge Brad Nailer Overview BNS200-18


This is the new 18 gauge brad nailer from Bosch tools Review your own tools today tool-rank.com Dimensions 9″ L x 2.25″ W x 9.75″ H Nail Diameter: 18 Gauge Nail Length: 5/8″ 2″ Nail Shank: Smooth Operating Range: 60 – 120 psi Weight (lbs.): 2.1