RSSAll Entries in the "Power Tool Safety" Category

Proving Knowledge with a Power Tool Safety Test

There are many individuals who work with power tools all day long at their jobs. In most cases, when an individual starts to work in this type of profession, there will be some sort of power tool safety test, even if an informal one, to see if the individual is proficient in his knowledge of power tool safety. Whether the power tools are Ryobi or some other brand, individuals must have some basic knowledge of the safety requirements that come with the use of such portable power tools so that the work place can be a safer place for all concerned. These power tool safety tests might be administered in a classroom setting, or they might be given after the employees have watched an informational video on the subject. In other cases, the intern might be asked questions by a highly qualified colleague or boss to find out if he has learned enough to safely work without supervision.

Parts of the Tests

One part of the power tool safety test is usually in regards to the safety equipment and clothing that should be worn on the job site. This can include gloves and goggles as well as work boots and other protective gear like hard hats. In addition, if there are any other hazardous materials that are on the job site, the test might cover the handling of those materials as well as that of the power tools.

Another part of the power tool safety test is how to properly carry the power tools from place to place on a job site. The power tools should never be carried by the cord since this weakens the cord’s connection to the device and can cause a shock. Additionally, the power tool should not be carried when the person’s finger is near the on and off button of the device, thus bringing the possibility of starting it by accident. The power tool can be carried by its handle, but the fingers must be kept well clear of the power button or switch to prevent an accidental start.

Besides carrying the power tools, another part of the power tool safety test is the proper maintenance of the power tools. Any tool that is seen to have damage to it should be set aside with a clear label on it so that other people do not use the device until it can be fixed. Any power tools that are not in use should be unplugged so that they are not started by accident when they are lying on the ground or on a table. The power cords should be kept in good condition so that there is not a threat of a shock, and all power tools should be kept away from water at all times.

Obtaining Information: Power Tool Safety Video

There are many organizations that deal with power tools that will require their employees to pass a power tool safety test in order to prove that they are familiar with all of the safety tips that can help maintain a safe work place. There are power tool safety videos on the market that organizations can use to train their employees on all of the current safety tips so that they can later take the test to prove their knowledge. These power tool safety videos will usually cover all the basics of power tool safety as well as some specialized tools that require even more safety precautions when handling them. Depending on the industry, there are some power tool safety videos that are specialized to that particular industry, such as construction or carpentry.

Training

The power tool safety videos will often start with general safety information, such as the type of clothing and other equipment to wear when using power tools. They will cover the proper use and types of gloves, hats, goggles and boots so that the individuals are properly prepared to use the various equipment. Gloves are important to protect the hands while utilizing the different types of equipment and can preserve the hands from injury. Goggles can help to protect the eyes from flying pieces of wood and metal during different types of construction with the power tools. Boots can help to prevent the workers from slipping on the job site as well as protect the feet from any tools or materials falling on the feet.

Another general type of information covered in the power tool safety video is the power cords that are used with the different pieces of equipment. The power cords should be checked so that there are not any tears in the cord, exposing the wires and making a shock more likely. In addition, the power tool safety video will show the proper way to carry the power tools so that there is not any damage to the person or the tool. For instance, the power tool should not be carried by the cord from place to place. This weakens the connection of the cord to the device and can cause a shock from wear and tear. The power tool safety videos will usually warn individuals to carry the tool by the handle, but with the finger away from the trigger or switch that turns the device on or off. This prevents and accidental start of the device due to tripping or being bumped when moving from place to place.

Receiving Instruction: Power Tool Safety Training

Whether the power tool safety training is a video, live class or informal training on a job site, this type of training is a must for those in the construction industry. There are too many unnecessary injuries that are related to neglect of power tool safety training when the safety tips are very easy to follow and only require following simple rules to keep the entire workplace safe. These power tool safety training tips can be found on the OSHA government site, where they try to help prevent disasters in certain industries by providing safety standards for those workplaces. The tips can also be found on various construction sites and tool manufacturing sites, as well as safety manuals that come with the various pieces of equipment.

Tips

One power tool safety training tip is to buy tools that are already double insulated. This means that the tool has a casing that is not made of metal, thus reducing the risk of shock while using the machine. Although this type of casing does not eliminate all chance of shock, it greatly reduces the chances, especially in regard to the possibility of coming into contact with exposed wiring on a job site. However, power tool safety training will warn individuals to still be careful with these double insulated tools when using them in wet conditions since the water can get into the power tool and cause a short circuit which can shock the individual holding it. In addition, if the power tool is dropped into some water, the individual must resist the urge to plunge his hand into the puddle to retrieve the equipment, but instead go to the power source and unplug the machine before retrieving it from the water, thus reducing the chances of shock.

The power cords that are used with these power tools are another area that is hit in power tool safety training classes since they are found all over a construction site, powering the tools that are being used. These cords should be checked at the end of each day to make sure that they are in good working condition. If there are any tears in the insulation of these cords, the cords should be replaced with new ones so that the exposed wiring does not come into contact with something metal and become grounded, shocking the individuals involved. The wiring should not cross and area where individuals walk so that they do not trip over the cords and fall. In addition, the power tools should not be carried by the cords since that will weaken that connection and possibly cause shock to the individual.

Reducing the Risk: Portable Power Tool Safety

Although there is always a risk when using power tools, utilizing portable power tool safety tips is a way to minimize the danger involved with these tools so that the individual or the people that work with that person, do not become harmed. There are power tool safety training classes that help individuals to learn safety methods for all different types of power tools and the equipment that goes with them. In addition, when being trained for a particular job, the foreman of the site may also go over certain portable power tool safety tips and may make certain inspections so that the safety of that job site is maintained.

Cords

One of the most neglected of the portable power tool safety instructions is to be aware of the cords that go with them. This includes the use of the extension cords on the job site that allow the power tools to stretch from place to place. These cords are often not inspected as regularly as the device itself since it is not considered a part of the equipment. However, keeping these cords in prime working condition is vital to portable power tool safety. If there is a tear in the insulation on the power cord, the wires that are inside of it can connect with metal objects around it and cause an electrical shock. That means that someone carrying a metal power tool, a metal toolbox, or other metal object could inadvertently touch the power cord with the tear in it and become shocked. If a cord has a tear, it should immediately be replaced so that this is not a problem.

Another aspect of portable power tool safety is to never carry the power tool by the cord, leaving the piece of equipment dangling freely beneath it. The power tool could bump into something and get switched on and hurt someone, or the place where the cord runs into the power tool can become torn and short the power tool out so that the person receives a shock. In addition, portable power tool safety requires that the person go to the plug at the wall socket to unplug a power tool rather than yanking out the cord from across the room. Although it takes more time, it helps to save wear and tear on the power cord and a possible electric shock. When a power tool is not in use, the tool should be unplugged as well so that it does not accidentally get started.

Handle with Care: Power Tool Safety Tip

There are many different types of portable power tools used on construction sites, requiring that safety measures be taken to protect everyone on the job. Power tool safety tips often get overlooked when working hard and trying to get a job done quickly and efficiently. However, if these tips are overlooked, individuals can become electrocuted, have limbs maimed or otherwise be injured on the job. Many of the power tool safety tips are very simple to follow and can save a lot of problems in the long run if they are followed.

Electrical and Handling

When handling a power tool, one safety tip is to be sure to keep all fingers away from the on/off switch so that it does not accidentally get turned on while carrying it from place to place. It is tempting to carry the power tool by the handle like it is handled when in action. However, this is very dangerous because any tripping or bumping on the way to the next location can trigger the start button and possibly cause injury to the individual or others who are nearby.

Another important power tool safety tip is to be aware of the electrical cords at all times. There are always a lot of electrical cords running to different power tools so individuals on a work site must be careful where they are walking to make sure that they do not trip on the cords, possibly yanking a power tool out of another person’s hand and causing him or others harm. The electrical cords should be checked on a regular basis to make sure that they do not have any damage to the insulation around the wiring in the cords. If there is damage, the cords should be immediately replaced so that the exposed wiring does not have a chance to touch the metal on a toolbox or piece of machinery, causing an electrical shock.

If possible, another power tool safety tip is to buy power tools that are double insulated. This means that the power tool casing is not of a metal material which helps to insulate the tool further and prevent electrical shock while in use. However, this does not ensure that there will never be a shock obtained from the use of the device. Even these tools must be kept out of a moist situation since the water can get into the casing and cause a short circuit which can shock the person using the machinery.

Checking in on Hand Power Tool Safety

Power tool safety tips are important for even the most experienced worker to review every once in a while to maintain the safest working conditions possible while on a job site. There are certain considerations that might slip out of the mind after working construction for a long period of time, but are important to maintain the safety of all workers on the site. Hand power tool safety is especially important as these smaller tools are often used and taken from granted on a job site. These tools are usually used with long cords or extension cords that also require some safety precautions be taken with their use.

Requirements

One of the requirements in hand power tool safety is that the power tools be handled respectfully when there is moisture on a job site since there is an increased risk of electrocution in those conditions. Even though many of the hand power tools today have double insulation, meaning that their casing is not metal as well as the other insulation properties built into the tool, this does not mean that the person cannot get an electric shock from the mismanagement of the tool. Keeping the hand power tool out of wet conditions is important to safety because the water can get into the casing and make contact with the electric wiring inside, causing a short circuit and shock to the individual who is holding the wet handle of the device.

Another requirement for hand power tool safety is to always unplug the device from a power source if the power tool is dropped into a puddle of water rather than pulling out the device first. This helps to ensure that there is not a shock obtained by grounding the electrical current that is running from the power source through the device, which could have been short circuited by contact to the water supply.

Finally, hand power tool safety requires that the extension cords that are used with th tools are also replaced regularly and are checked regularly for wear and tear. The extension cords should not have any tears in the insulation casing around the wires. If there is a tear, that means that if the wires inside come into contact with a metal toolbox or other metal machinery, the electricity in the wires can be conducted through the new source. This problem can easily be rectified by the individual buying a new power cord and also by buying a ground fault circuit interrupter that helps to cut the circuit if it becomes disrupted in some way.

The Importance of Power Tool Safety

Although hand power tools are used frequently on construction sites, safety concerns should always be kept at the forefront of everyone’s minds since it is easy to have an accident with these handy tools if they are not handled with care. Power tool safety is most often stressed when a new worker comes onto a site or when in training to work on a construction type of a job. Once the individual has worked for a time, however, often power tool safety gets overlooked in lieu of getting the job done more quickly. This is a common mistake and can be a lethal one if certain precautions are not followed.

Safety First

Power tool safety begins by handling the power cord properly. A power tool should never be carried around by the cord, leaving the piece of equipment to dangle freely from the cord and possibly causing injury from accidentally turning on. Also, even though it is sometimes convenient to yank a power cord out of a wall socket rather than walking across the room to unplug it properly, it can cause damage to the cord and possible electrocution in the future. Since the power cords are used with machinery that cut things, another safety tip is to be careful to keep the cord away from the sharp edges that may sever it and cause electrocution. In addition, all power tools should be unplugged when they are not being used to prevent accidental activation and injury.

Other power tool safety tips involve the proper use of the machinery. Gloves should be used to help to protect the hands from injury when using the different pieces of equipment. Footwear should be work boots so that the footing is always sure, preventing accidental slippage and falls while using the power tools. The steel toed boots are also valuable for protecting the feet from an accidental drop of the machinery onto the foot, especially when the machinery is active. One power tool safety issue that also gets ignored in the process of working hard is keeping the fingers away from the ‘on’ switch when the device is not in use and is only being carried from one place to another. This helps to prevent the device from being turned on while being carried, especially from tripping or someone else bumping into the person during the commute, causing injury to one or more people. If a power tool has become damaged, the tool should be removed from the work area, if possible, or at least labeled clearly so that it is not used until it is repaired.