RSSAll Entries in the "Makita Power Tool" Category

Makita SP6000K1 6-1/2" Plunge Circular Saw with 55" Guide Rail @ Wholesalepowertools.com


www.wholesalepowertools.com – Electronic Speed Control Maintains Constant Speed Under Load for Smooth Cutting – Variable Speed Dial Control (2000 – 5200 RPM) for Optimum Performance in a Variety of Materials – Built-in Current Limiter Helps Prevent Motor Burnout – Powerful 12 AMP Motor for Continuous Operation – Electronic Soft Start Feature for Smooth Start-Ups – Large Cutting Capacity (2-3/16″ at 90º and 1-9/16″ at 45º)

Makita LS1216L 12" Dual Slide Compound Miter Saw @ Wholesalepowertools.com


www.wholesalepowertools.com *Large cutting capacity for up to 8″ crown molding (nested), 6-1/2″ baseboard (vertical), and 15″ crosscut at 90° *Compact design with a patented 4-Steel Rail Sliding System further increases rigidity to produce superior cuts *Exclusive 6 linear ball bearings engineered to deliver smooth, solid, and adjustment-free “dead-on” accurate cuts *Exclusive 5-1/2″ tall dual sliding fence system features versatile upper and lower fence adjustments for more precise miter and bevel cuts

MAKITA POWER TOOLS Resin Fiber Discs, 4" 24 Grit Sold in packs of 25

  • Superior stock removal
  • Specially formulated resin bond coat
  • Great for metal and wood
  • 4-1/2″ diameter, 24 grit, 7/8″ arbor hole
  • 25 per pack

Product Description
* Superior stock removal * Specially formulated resin bond coat * Great for metal and wood * 4-1/2″ diameter, 24 grit, 7/8″ arbor hole * 25 per pack… More >>

MAKITA POWER TOOLS Resin Fiber Discs, 4″ 24 Grit Sold in packs of 25

Makita Power Tools MAKML143 14.4V FLOURESCENT FLASHLIGHT

  • Manufactured to the Highest Quality Available.
  • Satisfaction Ensured.
  • Great Gift Idea.

Product Description
Run time is a minimum of 80 minutes. Uses the same 14V (pod style) batteries that many other Makita cordless tools use. Battery and charger sold separately. Battery not included…. More >>

Makita Power Tools MAKML143 14.4V FLOURESCENT FLASHLIGHT

How To Sharpen Blades (2 of 8) with the Makita Blade Sharpener 9820-2


Part 2 of 8 – Blade Sharpening For Milling Lumber AskWoodman.com This second video shows my blade installation technique, as well as specific bevel adjustments for the Makita 9820-2 Horizontal Wheel Wet Blade Sharpener. Free yourself from the frustration of sharpening services and dull tools.This is 2 in a series of 8 short videos that demonstrates all aspects of removing, sharpening, and reinstalling planer and jointer knives, as well as using the newly sharpened planer and jointer knives to dimensionalize a board. The primary focus of these instructional woodworking videos is how to use and master the Makita 9820-2 Blade Sharpener. Your woodworking satisfaction level will be off the charts with extra sharp tools! For more information about woodworking techniques and tools check out AskWoodman.com

When to Replace Your Power Tool Switch

With a body full of moving parts, pieces and, and what are scientifically termed “gizmos,” it is no surprise that tool diagnosis can sometimes be a real pain. Fortunately though, our power tools, through subtle hints, smells, and sounds, will help us determine which component has bit the dust. For example, there are a few specific clues to look for that will indicate when it’s the switch in your power tool that has presently gone kaput.

The first symptoms to arise will come in the form of malfunctioning or failing start-ups. You will attempt to activate the tool and as if life has simply left it for greener pastures, the tool will be absolutely dead, or, at least, it will require several pumps and perhaps a joggle or two to revive itself. Overtime, it is regular wear and tear on the switch’s interior connections that causes these, well, improper, incomplete connections and consequently your incomplete start-ups as well. This wear and tear will also effect (in no particular order) the performance of your tool when it does activate. As some of the tool’s energy is lost in the switch’s poor transmission, your tool will likely feel a bit more suggish. Such malfunctions may also be caused by a switch battling heat damage, therefore, simply relying on the newness of your power tool or the infrequency of its use may not always be the most accurate reference frame.

If these symptoms are left untreated or undetected, the switch will simply short-out completely and start-up (and obviously use as well) will be impossible until the switch is replaced. Although a switch replacement is a reasonably achievable repair process, or at least a relatively inexpensive one, it is always best to settle all disputes with a good-old-fashioned visual inspection. Normally, it can be very clearly seen if your switch has suffered any heat damage – the interior wiring will be discolored, or the wires and connectors may appear burned or melted. If there is no visible heat damage or other untoward appearances, it is likely the switch itself, with all its own wires and gizmos, has simply met (or is very close to meeting) its maker.

Replace the switch, or have it replaced by a technician, and you and your power tool should be back on the high-road in no time. If problems with poor performance or slow start-ups persist, I recommend checking-up on the tool’s brushes. If the brushes check-out, you may have a more complex issue. At this point, it is smart to have the tool more completely inspected by an authorized service center.

In summary, if your tool has trouble starting, or if you notice a decrease in its regular power or performance, its likely your switch needs to be replaced. Remember though, to always take good care of your power tools and these replacements will be far fewer and further between.

Specializing in tool parts & web communications, Mallory joined M&M Tool 4 years ago adding to their over 150 years combined experience. For over 70 years M&M Tool has provided the best service to the tool industry with replacement parts like DeWalt Parts and Makita Parts, sales, & service to woodworking products, machinery & power tools.

Mike Gosselaar Interview


The best motorcycle technician in the business talks with Makita about adding another Supercross championship to his already impressive resume. Mike Gosselaar has won multiple championships with Ricky Carmichael, Chad Reed, and more recently, Ryan Dungey. What is the his secret? Watch this interview and find out!

NASA ISS On-Orbit Status 16 October 2010

NASA ISS On-Orbit Status 16 October 2010
All ISS systems continue to function nominally, except those noted previously or below. Saturday – crew rest day.

Read more on SpaceRef

Battery For Makita Power Tools 1233 TBB.30H

  • Items are generic items (non OEM).
  • Items are all professionally tested before they are shipped.

Product Description
Battery For Makita Power Tools Extended Life Ni-MH Power Tools Battery for Makita Power Tools. Fits 6213DWBE, 6213DWBLE, and others. Delivers more power and torque than Ni-Cd battery. Alternate Part No.s 192698-A, 1234, 193157-5Black. 12.0V 3.0Ah. TB1233B.30H… More >>

Battery For Makita Power Tools 1233 TBB.30H

18v,2200mAh, Ni-MH, Replacement MAKITA Power Tool Battery for MAKITA UB181D, ML180, SC190DWDE Series, Compatible Part Numbers: 1823, 1833, 1834, 1835, 1835F, 192828-1, 192829-9, 193061-8, 193102-0, 193140-2, 193159-1, 193783-0

  • Battery Type: Ni-MH Voltage: 18.00V
  • Capacity: 2200mAh Color: Black
  • Dimension: 119.75 x 93.70 x 105.10 mm Weight: 1091.46 g
  • Product Type: Replacement Battery (Brand New)
  • Condition: New, 1 year warranty! (Remark: Please read the description carefully before bidding.)

Product Description
This ITEM is compatible with the following models?***[1]***Makita UB181D,
Makita ML180,
Makita SC190DWDE,***[2]***Makita 4334 Series,
Makita 4334D, Makita 4334DWD, Makita 4334DWDE,,***[3]***Makita 5000 Series,
Makita 5026DB, Makita 5026DWB, Makita 5026DWD,
Makita 5026DWFE, Makita 5036DB, Makita 5036DWB,
Makita 5036DWD, Makita 5036DWFE, Makita 5046DB,
Makita 5046DWB, Makita 5046DWD, Makita 5046DWDE,
Makita 5046DWFE, Makita 5620DWD, Makita 5621DWD,***[4]***Ma… More >>

18v,2200mAh, Ni-MH, Replacement MAKITA Power Tool Battery for MAKITA UB181D, ML180, SC190DWDE Series, Compatible Part Numbers: 1823, 1833, 1834, 1835, 1835F, 192828-1, 192829-9, 193061-8, 193102-0, 193140-2, 193159-1, 193783-0